- Melting point:
- 45-46 °C(lit.)
- Boiling point:
- 83 °C0.5 mm Hg(lit.)
- 1,282 g/cm3
- refractive index
- Flash point:
- >230 °F
- storage temp.
- ethanol: soluble10%, clear to hazy, colorless to faintly yellow
- 1.1(at 29℃)
- Specific Gravity
- Water Solubility
- 775 g/L
- Unstable - heat sensitive. Incompatible with strong oxidizing agents, strong reducing agents, bases, acids, iron and its salts, steel, brass, lead, moisture. Reacts with acids to produce very toxic gas.
- CAS DataBase Reference
- 420-04-2(CAS DataBase Reference)
- NIST Chemistry Reference
- EPA Substance Registry System
- Risk and Safety Statements
|RIDADR||UN 2811 6.1/PG 3
|Toxicity||LD50 i.p. in male mice: 200-300 mg/kg (Doull)|
|Flammability||1||Materials that require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Includes some finely divided suspended solids that do not require heating before ignition can occur. Flash point at or above 93.3 °C (200 °F). (e.g. mineral oil, ammonia)|
|Instability||3||Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked (e.g. ammonium nitrate, cesium, hydrogen peroxide)|
浙江体彩20选5单期走势图 www.yxnqz.tw (NFPA, 2010)
Cyanamide price More Price(13)
|Manufacturer||Product number||Product description||CAS number||Packaging||Price||Updated||Buy|
|Alfa Aesar||L03744||Cyanamide, 98+%, stab.||420-04-2||5g||$16.7||2018-11-13||Buy|
|Alfa Aesar||L03744||Cyanamide, 98+%, stab.||420-04-2||25g||$52.7||2018-11-13||Buy|
Cyanamide Chemical Properties,Uses,Production
Physicochemical propertyCyanamide is also called hydrogen cyanamide，urine anhydride, its scientific name is amino nitrile. It is white orthogonal series crystals, in a diamond shaped, colorless, easy moisture. Melting point is 42℃, boiling point is 83℃ (50.66kPa), vapor pressure is (20℃) is 500MPa. Cyanamide is high solubility in water and weak acid, and completely miscible in water of 43℃. It is soluble in benzene and phenol, alcohols, amines, ethers, ketones, slightly soluble in benzene, halogenated hydrocarbons, but insoluble in epoxy ethane, cyclohexane. Solubility (20℃ ): water 4.59kg/L, methyl ethyl ketone 505g/kg, acetic acid ethyl ester 424g/kg, octanol 288g/kg, chloroform 2.4 g/kg. It can volatilize with water vapor, so it can dissolve in a series of solvents. In polar organic solvent, solubility is large, and in non-polar solvents is smaller. Crystal cyanamide is not stable, large polarity. Due to the cyanamide molecular structure containing the cyano and amino, both of which are active groups, it has the functional groups of the multiple reaction performance, prone to addition, substitution, condensation reaction. It is stable to light. It decomposites to dicyandiamide and polymers in alkali, and decomposites to urea in acid. It decompose when heated to 180℃. Product has four kinds of crystal of 25%, 40%, 50% and 90%. 25% of cyanamide solution is mainly used for creatine production, 50% and 90% of cyanamide solutions are mainly used for producing methylene urea pharmaceutical intermediates.
Figure 1 Three-dimensional structure of cyanamide
Main application1. Important pharmaceutical raw material
Cyanamide is mainly used for the production of hydrochloric acid cytarabine, dye intermediate 3-amino-5-hydroxy-1,2,4-nitrogen azole, cyanide urea amine, melamine methyl carbamate, cyanide urine amide, thiourea, carbendazim. It is also raw material for preparation of organic guanidine, then the product pharmaceutical barbituric acid, sulfa drugs and guanidine salt, etc. It can also be used for production anticancer drugs of fluorouracil in medicine. Cyanamide calcium salt can be used for clinical treatment of alcoholism and anthelmintic action.
2. Raw materials for chemical pesticides
2.1 Cyanamide can be used as chemical raw materials of no residue, low toxicity, broad-spectrum pesticide, and can also be used for production of antibacterial agent such as carbendazim, benzene benomyl, methyl mepanipyrim and mepanipyrim, Pirimicarb, pyrimidinoxy phosphorus, herbicide Chlorsulfuron, Metsulfuron methyl, Metsulfuron methyl ethyl, long ether tribenuron methyl and bensulfuron methyl and pyrazole ethyl, hexazinone, etc. It has the significance of technological innovation for pesticide production, solves the environmental pollution while the general pesticide production enterprises can be difficult to solve the problem using calcium cyanamide in the production of pesticide. So using cyanamide can save equipment investment, reduce production costs.
2.2 In recent years, cyanamide is used as off leaf agents, herbicides and pesticides in abroad, but also can be used as pesticide, and cyanamide has a certain of nitrogen application effect. Cyanamide solution was used as a defoliant, non-toxic pesticides for fruit trees in abroad.
2.3 The cyanamide in agriculture can be used as plant growth regulators, with both pesticidal and bactericidal effects. Directly sprayed on crops, can effectively inhibit the activity of catalase in plants, accelerate plant oxidative pentose phosphate (PPP) circulation, thus speeding up the generation of basic substances in plants, play a role in the regulation of growth. The field efficacy trials showed that It can regulate the growth and increase production of cherries and grapes. Before 15 to 20 days in grape germination, it sprayed evenly on the branches, uniform of a drug on bud eye, can advance germination of 7 to 10 days. For early flowering, full flowering stage, coloring period and mature period, using it can aslo advance early. At the same time it is good dormancy terminating agent in the production of kiwi, cherries, grapes. it sprayed evenly on bud eye in the dormant period, it can break the dormancy period, can be early germination, early flowering, early mature and early on the market. It can significantly improve the yield, change fruit fleshy and improve the quality of varieties.
Excellent flame retardant materialsThe cyanamide is mainly used for production of flame retardant agent such as o-methyl isourea, creatine, guanidine phosphate. At the same time, as a kind of flame retardant material with excellent performance, cyanamide polyols and polyether solution are used for production of polyurethane, can significantly improve the flame retardancy of polyurethane material, which is a new type of fine chemical new materials.
Fixing materialThe materials from the two polymer fixing agent melamine dicyandiamide can be used in the production of fixing agent Y, fixing agent G, fixing agent M and fixing agent B. Reaction product of cyanamide, poly formaldehyde and acid copper is fixing agent B, which is gray powder, can be used for direct dyes and staining after treatment. 30.9 copies of diethylenetriamine and 24.8 dicyandiamide react under 100℃, then reaction again in 155 ℃, after 5h cooling, crushing to obtain colorless powder. It is a kind of formaldehyde-free fixing agent, low cost, having a development promising as green products.
Toxicity1. It has the skin irritation and corrosive, can lead to severe dermatitis, the person suction can cause mucosal irritation, transient flushing, headache, dizziness, shortness of breath, tachycardia and hypertension and other symptoms.
2. Mutagenicity test: mild irritation to rabbit skin and eye severe stimulation, the drug of guinea pig skin allergic reaction test is attenuated sensitive drugs.
3.The effect maximum dose is 0.2mg/kg/d in rats with 90d sub chronic feeding experiment. Cyanamide drug and 50% aqueous solution are medium toxicity. Please use it to Caution!
Chemical propertyPure cyanamide is a transparent liquid, m.p.-115℃, b.p.-8.5℃, soluble in alcohols, phenols, amines, ethers, easily soluble in benzene, alkyl halides, 77.5% of it is soluble in water of 15℃. The high concentration of cyanamide is not stable, easy polymerization, often adding stabilizer. General merchandise for 50% of cyanamide solution, n20D 1.4050, the relative density is 1.082.
Uses1.Cyanamide is an important intermediate of pesticide. It can also be used for production of antibacterial agent such as carbendazim, benzene benomyl, methyl mepanipyrim and mepanipyrim, Pirimicarb, pyrimidinoxy phosphorus, herbicide Chlorsulfuron, Metsulfuron methyl, Metsulfuron methyl ethyl, long ether tribenuron methyl and bensulfuron methyl and pyrazole ethyl, hexazinone, etc.
2. In the pharmaceutical industry, it is used as a raw material for the production of hydrochloric acid. It is also used for the production intermediates of 3-amino-5-hydroxyl-1,2,4-triazol in the dye industry. In addition, for organic synthesis and plastic raw materials, it can be used for production of cyanuric amide, dicyandiamide, cyanide methyl carbamate etc.
3.Cyanamide liquid is used for industrial raw materials, pharmaceutical intermediates, agricultural pesticides, fertilizer, plant growth regulator, food additives etc.
4. Used in the production of materials such as urine.
Methods of production1.It is gotten by the reaction of lime nitrogen with sulphuric acid。
The preparation method is based on the lime nitrogen as raw material, reaction with sulfuric acid is made. In the reactor, the water is putted, with ice water cooling, lime nitrogen input, the temperature was kept between 0 to 15℃, dropping 5% of sulfuric acid solution, adjusting the pH = 6 and holding 20 min. Then filtration, washing, and then return to a reaction kettle, added lime nitrogen, repeat the above operation 2 times, the obtained filtrate is through membrane thickening, keeping a certain temperature, concentrated content reached 50%~55%, Cyanamide solution of 50% is obtained.
Reaction equation: CaCN2+H2O+H2SO4-> NH2CN+CaSO4
2. Urea process。
Chemical Propertieswhite crystalline solid
Chemical PropertiesCyanamide is a combustible crystalline solid, but it is usually found as a 25% liquid solution.
Definitioncyanamide: 1. An inorganic saltcontaining the ion CN22-. See calciumcyanamide. 2. A colourless crystallinesolid, H2NCN, made by the actionof carbon dioxide on hotsodamide. It is a weakly acidic compound(the parent acid of cyanamidesalts) that is soluble in water andethanol. It is hydrolysed to urea inacidic solutions.
General DescriptionColorless deliquescent crystals. Mp: 45°C; bp: 260°C. Density: 1.282 g cm-3. Quite soluble in water (77 g / 100 g solution at 15°C). Soluble in butanol, methyl ethyl ketone, ethyl acetate, alcohols, phenols, amines, ethers. Note: The term "Cyanamide" is also used to refer to the important compound calcium Cyanamide, which is a different chemical.
Reactivity ProfileCyanamide is the amide of cyanic acid. Non-flammable but combustible (flash point: 140°C). Decomposes on warming above 49°C. Emits toxic fumes of CN- and NOx when heated to decomposition or on contact with acids or acid fumes (Hazardous Chemicals Desk Reference, p. 353 (1987)). Contact with moisture, acids or bases may cause a violent reaction at temperatures above about 40°C. Dry solid may polymerize at temperatures above 122°C. Rapid or explosive polymerization may occur during the evaporation of aqueous solutions. Reacts explosively with strong oxidizing agents and strong reducing agents. Attacks various metals (International Chemical Safety Card).
HazardStrong irritant to skin and mucous membranes; avoid inhalation or ingestion.
Agricultural UsesCyanamide, the trade name for calcium cyanamide, contains calcium hydroxide and carbon in small quantities as impurities. It is used as a fertilizer, the powdered form of which contains about 22% nitrogen.
Agricultural UsesHerbicide, Plant growth regulator: A U.S. EPA restricted Use Pesticide (RUP). Not currently approved for use in EU countries (re-submitted). Used primarily as a plant growth regulator. Cyanamide may be melted to give a dimer, dicyandiamide or cyanoguanidine. At higher temperatures it gives the trimer, melamine, a raw material for melamine-formaldehyde resins.
Trade nameDORMEX®; SKW 83010®
Contact allergensCyanamide and its salts are used in various occasions such as in chemistry, in antirust solutions, or in a drug (Come?) for treating alcoholism (inhibition of alcohol deshydrogenase).
Safety ProfilePoison by ingestion, inhalation, and intraperitoneal routes. Moderately toxic by skin contact. Experimental reproductive effects. Combustible when exposed to heat or flame. To fight fire, use CO2, dry chemical. Thermally unstable. Contact with moisture (water), acids, or alkalies may cause a violent reaction above 40'. Concentrated aqueous solutions may undergo explosive polymerization. Mixture with 1,2 phenylenediamine salts may cause explosive polymerization. When heated to decomposition or on contact with acid or acid fumes, it emits toxic fumes of CNand NOx. See also CYANIDE and AMIDES.
Potential ExposureCyanamide may be melted to give a dimer, dicyandiamide or cyanoguanidine. At higher tem- peratures it gives the trimer, melamine; a raw material for melamine-form aldehyde resins.
ShippingUN3276 Nitriles, liquid, toxic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required, Potential Inhalation Hazard (Special Provision 5).
Purification MethodsPurify it by placing ca 15g in a Soxhlet thimble and extracting exhaustively (2-3hours) with two successive portions of Et2O (400mL, saturated with H2O by shaking before use) containing two drops of 1N acetic acid. Two successive portions of Et2O are used so that the NH2CN is not heated for too long. Each extract is dried over Na2SO4 (30g), then combined and evaporated under reduced pressure. The NH2CN may be stored unchanged at 0o in Et2O solution in the presence of a trace of AcOH. Extracts from several runs may be combined and evaporated together. The residue from evaporation of an Et2O solution is a colourless viscous oil which sets to a solid and can be recrystallised from a mixture of 2 parts of *C6H6 and 1 part of Et2O. Concentrating an aqueous solution of NH2CN at high temperatures causes EXPLOSIVE polymerisation. [Kurzer & Lawson Org Synth Coll Vol IV 645 1963, Pinck & Salissbury Inorg Synth III 39 1950, Soloway & Lipschitz J Org Chem 23 613 1958.] Hygroscopic.[Beilstein 3 IV 145.]
IncompatibilitiesCyanamide may polymerize at tempera- tures above 122℃ , or on evaporation of aqueous solutions. Reacts with acids, strong oxidants, strong reducing agents such as hydrides and water, causing explosion and toxic hazard. Attacks various metals. Decomposes when heated above 49℃ C, on contact with acids, bases, 1,2-phenylene diamine salts; and moisture; producing toxic fumes includ- ing nitrogen oxides and cyanides. Nitriles may polymerize in the presence of metals and some metal compounds. They are incompatible with acids; mixing nitriles with strong oxidizing acids can lead to extremely violent reac- tions. Nitriles are generally incompatible with other oxi- dizing agents such as peroxides and epoxides. The combination of bases and nitriles can produce hydrogen cyanide. Nitriles are hydrolyzed in both aqueous acid and base to give carboxylic acids (or salts of carboxylic acids). These reactions generate heat. Peroxides convert nitriles to amides. Nitriles can react vigorously with reducing agents. Acetonitrile and propionitrile are soluble in water, but nitriles higher than propionitrile have low aqueous solubility. They are also insoluble in aqueous acids .
Waste DisposalAdd excess alkaline calcium hypochlorite with agitation. Flush to sewer after 24 hours. Cyanamide can also be destroyed in an incinerator equipped with afterburner and scrubber.
Cyanamide Preparation Products And Raw materials
View Lastest Price from Cyanamide manufacturers
|Image||Release date||Product||Price||Min. Order||Purity||Supply Ability||Manufacturer|
|US $1.00 / KG||1KG||98%||1000KG||career henan chemical co|
- USAF ek-1995
- CYANAMIDE F1000
- CYANAMIDE L500
- HYDROGEN CYANAMIDE
- 1-(2-methoxyphenyl)-N-methylpropan-2-amine hydrochloride
- Cyanogen nitride
- Cyanamide solution
- Carbamic acid nitrile
- cyanamide,urea anhydride
- CYANAMIDE, 50 WT. % SOLUTION IN WATER
- Cyanamide, 98+%, stab.
- Cyanamide, 50% w/w aq. soln., stab.
- Cyanamide,50% aq solution
- Cyanamide ,95%
- Cyanamide,Carbimide, Hydrogen cyanamide
- Cyanamide, 98+%
- CYANAMIDE, CRYST., M.P. 43 degrees
- CYANAMIDE, 50% AQUEOUS SOLN
- CyanaMide, 50wt.% in H2O
- CyanaMide solution,50% in H2O
- Carbamonitrile, Cyanoamine
- Cyanamide, 50% aqueous solution
- CyanaMide solution 50 wt. % in H2O
- CyanaMide aq
- Hydrogen Cyanamide 50% sl
- Cyanamide solution,1000ppm
- Cyanamide, 98%, stabilized
- CYANAMIDE, STAB.
- Cyanamide, stabilized, 95%
- CYANAMIDE , STAB. WITH 0.5% PHOSPHORIC ACID
- CYANAMIDE IN 50% WATER SOLUTION
- Cyanamide, 50% w/w aq. soln.
- Cyanamide, 98+%, stab. with ca 0.5% phosphoric acid
- cyanamide carbanonitril
- Carbodiimide, Hydrogen cyanamide
- Cyanamide, 95%, stabilized
- Amino cyanide
- Carbamic nitrile
- Cyanamide,50 wt.% in water, stabilized with phosphoric acid
- cianamida hidrogenada